Free Download RAID Reconstructor 3.03 - Data Recovery for RAID Arrays

Misc  Views:9(+0) Shareware

Recover data from a impoverished RAID Level 5 or 0 Array.
Runtime's RAID Reconstructor will assist you to regain data from a impoverished RAID Level 5 Array consisting of 3 to 14 drives, RAID Level 0 Array (Striping) consisting of 2 drives.

Even if you do not know the RAID parameters, such as motor govern, obstruct size and direction of rotation, RAID Reconstructor will dissect your drives and ascertain the castigate values. You will then be able to create a copy of the reconstructed RAID in an trope file or on a physical motor.

Once you created an trope you prat use it for further data recovery processing with Runtime's GetDataBack. If you create the trope on another physical motor, you prat procedure it with GetDataBack too or you might regular be able to immediately boot from it.

RAID Reconstructor is read-only. It will not render to "sterilise" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single motor involved and write these sectors in the castigate govern to the designated destination. This procedure is also called "de-striping".

Because one motor is tautologic in RAID 5, it is sufficient to experience one less than the original count of drives (N) in the array. RAID Reconstructor prat recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives.

The RAID Reconstructor will regain both, hardware and software RAIDs. It will regain from impoverished Windows Dynamic Disk sets.